Reduction of Blanking Die Wear by Creating Film Lubricants on Work Piece

โดย นฤทธิ์ คชฤทธิ์  และพันธุ์พงษ์ คงพันธุ์

ปี 2553

บทคัดย่อ (Abstract)

แผ่นเหล็กหล้าไร้สนิมถูกนำมาใช้ในอุตสาหกรรมยานยนต์อย่างต่อเนื่อง โดยเฉพาะผลิตชิ้นส่วนตัวถังถูกขึ้นรูปด้วยกระบวนการปั๊ม เช่นงานลากขึ้นรูป และงานปั๊มตัด ซึ่งเกิดปัญหาด้านการสึกหรอของแม่พิมพ์ที่ขึ้นรูปโดยปราศจากการใช้สารหล่อลื่น งานวิจัยนี้มีจุดมุ่งหมายนำเสนอการสร้างแผ่นฟิล์มบนชิ้นงานในงานปั๊มตัด โดยทำการออกแบบการทดลองเพื่อสร้างแผ่นฟิล์มในงานปั๊มตัด การทดลองทำการศึกษาเปรียบเทียบกันระหว่างการปั๊มตัดธรรมดา กับการปั๊มตัดโดยการสร้างแผ่นฟิล์ม เพื่อศึกษาลักษณะของผิวตัดเฉือน, แรงตัด และการสึกหรอของพันซ์ ผลการทดลองที่ได้พบว่าผิวขอบคมตัด (ช่วงผิวเรียบ) ของการปั๊มตัดโดยการสร้างแผ่นฟิล์มมีคุณภาพผิวตัดเฉือนชิ้นงานดีกว่างานปั๊มตัดโดยปราศจากการสร้างแผ่นฟิล์มการสร้างแผ่นฟิล์มสามารถช่วยลดแรงตัดลงได้ 11.79 เปอร์เซ็นต์ ของงานปั๊มตัดที่ไม่ใช้สารหล่อลื่น ส่วนการสึกหรอบริเวณคมตัดของพันซ์พบว่าใช้สารหล่อลื่นแบบแผ่นฟิล์มในงานปั๊มตัดเกิดการสึกหรอน้อยประมาณ 0.032 มิลลิเมตร

Stainless steel sheets have been extensively used in the automotive industry, particularly on bodyparts which are usually produced by stamping processes, such as deep drawing and blanking, are known to often cause flakes and powdering and consequent adhesion onto the tool when used without heavy lubricants. The main goal of the work presented in this paper is to enable the creating of thin film lubricant for blanking process. The laboratory tests have been especially designed to create the thin film in blanking process. There are two types of experiment; blanking process without lubricant, blanking process with thin film lubricant. In order to investigate the phenomena of the shearing edge, the cutting fore and the punch wear. The results showed; (i) the sheared cutting edge (shear band) of the blanking process with thin film lubricant produced better quality the blanking process without lubricant, (ii) the cutting force of the blanking process with thin film lubricant decreased approximate 11.79 %: (iii) the wear of the punch edge of the blanking process with thin film lubricant, was 0.032 mm.

DOWNLOAD : การลดการสึกหรอของแม่พิมพ์ตัดโลหะด้วยการสร้างแผ่นฟิล์มบนชิ้นงาน